JVC GY-HM700CHE - Manual (Page 115)

111
The menu settings can be stored on the camera recorder or
an SDHC card by saving them as a setup file.
Loading a saved setup file enables you to reproduce the
appropriate setup state speedily.
Two types of setup files are available.
Ⅵ Scene file:
File that contains all menu settings, ranging from video
format settings to image creation settings such as device
settings and shooting conditions, as well as the contents of
the [Favorites Menu].
Ⅵ Picture file:
File that contains image creation settings in accordance to
the shooting conditions ([Camera Process] menu items).
(A Page 76)
Make use of the [Setup File Manage] menu to save or load a
setup file.
The following operations can be performed on the [Setup File
Manage] menu.
ⅷ Saving setup files (A Page 112)
ⅷ Loading a setup file (A Page 113)
ⅷ Resetting a saved file (A Page 113)
Ⅵ Number of storable setup files
Camera recorder : [CAM1] to [CAM4]
SDHC Card
Slot A : A[EXT1] to A[EXT8]
Slot B : B[EXT1] to B[EXT8]
Ⅵ Preset setup files
As described below, there are three types of scene files and
two types of picture files that can be loaded according to
different shooting conditions.
Scene file
[GY-HD 60p LIKE] : Setting is adjusted according to the
tone of the GY-HD series. [Camera
Resolution] is set to
A1280x720B, and
[Frame & Bit Rate] is set to
A60p(HQ)B.
[GY-HD 50p LIKE] : Setting is adjusted according to the
tone of the GY-HD series. [Camera
Resolution] is set to
A1280x720B, and
[Frame & Bit Rate] is set to
A50p(HQ)B.
[CINEMA 1080/24p]: Setting that is suited for movie-like
video shooting. [Camera Resolution]
is set to
A1920x1080B, and [Frame &
Bit Rate] is set to A24p(HQ)B.
Picture file
[GY-HD LIKE] : Setting is adjusted according to the
tone of the GY-HD series.
[CINEMA] : Setting that is suited for movie-like
video shooting.
Memo:
● The above setup files are used exclusively for loading.
They cannot be overwritten or reset.
Configuring Setup Files