JVC GY-HM700CHE - Manual (Page 106)

102
Status Screen
These are the status screens displayed in Media mode (IEEE1394 Input mode).
STATUS 1 Screen
STATUS 2 Screen
Status Screen in IEEE1394
Input Mode
RES
[Event/Warning Display Area] (A Page 95 )
* Appears only when a warning is displayed [Voltage/Battery Power] (A Page 102 )
1280x720
24p HQ
282min
A
B
C D
[Event/Warning Display Area] (A Page 95 )
Item Description
A Frame Rate/Bit Rate Displays the frame rate and bit rate in pairs. (60p HQ, 30p HQ, 60i HQ, 60p SP, 30p SP, 60i SP, 50p HQ, 25p
HQ, 50i HQ, 50p SP, 25p SP, 50i SP, 24p HQ, 24p SP)
B Resolution Displays the video image resolution. (1920 ן1080, 1440ן1080, 1280ן720)
C Audio Level Meter Displays the audio level for CH-1 and CH-2.
When the input sampling frequency is set to a value other than 48K in IEEE1394
mode, a
mark is displayed with the frequency. (32k, 44.1k)
The positions of -20 dB and -10 dB are displayed as A o B.
Memo:
● You can turn ON/OFF the display using [Audio Meter] of [Status Display] in the
[LCD/VF] menu. (A Page 85)
D Voltage/Battery
Power Displays the current status of the power supply in use.
Display Description
Currently powered by an AC adapter. The current voltage is shown on the right.
If the supplied voltage from the AC adapter is low, the voltage value will be
displayed in red as a warning.
Currently powered by a battery.
When the battery power runs out, the battery mark appears hollow, and
ARESB is
displayed.
Memo:
● The display on the right can be set using [Battery Info] of [Status Display] in the
[LCD/VF] menu. (A Page 85)
-20 dB -10 dB
12.3V
12.3V
200min
30%
RES