beautypg.com

Pnp/pci configuration – IBM CI5VGM Series User Manual

Page 61

background image

Chapter 3 BIOS Configuration

CI5VGM User’s Manual

57

PNP/PCI Configuration

This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.

ROM PCI/ISA BIOS

PNP/PCI CONFIGURATION

AWARD SOFTWARE INC.

PNP OS Installed

: No

CPU to PCI Write Buffer

: Enabled

Resources Controlled by

: Manual

PCI Dynamic Bursting

: Enabled

Reset Configuration Data

: Disabled

PCI Master 0 WS Write

: Disabled

PCI Delay Transaction

: Enabled

IRQ-3 assigned to

: Legacy ISA

PCI Master Read Prefetch

: Enabled

IRQ-4 assigned to

: Legacy ISA

PCI#2 Access #1 Retry

: Disabled

IRQ-5 assigned to

: PCI/ISA PnP

AGP Master 1 WS Write

: Enabled

IRQ-7 assigned to

: Legacy ISA

AGP Master 1 WS Read

: Disabled

IRQ-9 assigned to

: PCI/ISA PnP

IRQ-10 assigned to

: PCI/ISA PnP

PCI IRQ Activated By

: Level

IRQ-11 assigned to

: PCI/ISA PnP

Assign IRQ for USB

: Enabled

IRQ-12 assigned to

: PCI/ISA PnP

Assign IRQ for VGA

: Enabled

IRQ-14 assigned to

: PCI/ISA PnP

IRQ-15 assigned to

: PCI/ISA PnP

DMA-0 assigned to

: PCI/ISA PnP

DMA-1 assigned to

: PCI/ISA PnP

ESC : Quit

З И Е : Select Item

DMA-3 assigned to

: PCI/ISA PnP

F1 : Help

PU/PD/+/- : Modify

DMA-5 assigned to

: PCI/ISA PnP

F5 : Old Values

(Shift) F2 : Color

DMA-6 assigned to

: PCI/ISA PnP

F6 : Load BIOS Defaults

DMA-7 assigned to

: PCI/ISA PnP

F7 : Load Setup Defaults


PNP OS Installed
This field allows you to specify if the operating system installed in your
system is plug and play aware.
NOTE:

Operating systems such as DOS, OS/2, and Windows 3.x do
not use PnP


Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
automatically. However, this capability needs you to use a PnP operating
system such as Windows 95. The default value is Manual.

Reset Configuration Data
This field allows you to determine whether or not to reset the
configuration data. The default value is Disabled.

IRQ3/4/5/7/9/10/11/12/14/15, DMA0/1/3/5/6/7 assigned to
These fields allow you to determine the IRQ/DMA assigned to the ISA
bus and is not available to any PCI slot.