IBM CI5VGM Series - Manual (Page 128)

Chapter 8 Ethernet Setup User’s Guide
124 CI5VGM User’s Manual
LAN Driver Installation for Windows NT 4.0
The CI5VGM comes with a diskette labeled
Intel 82558B LAN Windows
95/98 & Windows NT 4.0 Drivers that is to be used in conjunction of the
LAN drivers installation. Follow the steps below to install the drivers for
Windows NT 4.0.
1. Click
Start
⇒
Settings
⇒
Control Panel .
2. Click Network .
3. Click Yes .
4. Select Wired to the network , then click Next .
5. Click from the list .
6. Click Have Disk .
7. Insert the diskette labeled Intel 82558B LAN Windows 95/98 &
Windows NT 4.0 Drivers into the floppy disk drive then click OK .
8. Click OK .
9. Click Next .
10. Select the Protocol that you want then click Next .
11. Select the Network Services then click Next .
12. Click
Next .
13. Insert the Windows NT 4.0 CD into the CD-ROM drive. Type d:\ then
click Continue .
14. Click OK .
15. Click Next .
16. Click Next .
17. Type your Workgroup then click Next .
18. Click Finish .
19. Click Yes to restart the computer and for the settings to take effect.