IBM CI5VGM Series - Manual (Page 58)

Chapter 3 BIOS Configuration
54 CI5VGM User’s Manual
Power Management Setup
The Power Management Setup allows you to save energy of your system
effectively. It will shut down the hard disk and turn off video display after
a period of inactivity.
ROM PCI/ISA BIOS
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
ACPI function : Enabled Primary INTR : ON
Power Management : User Define IRQ3 (COM 2) : Primary
PM Control by APM : Yes IRQ4 (COM 1) : Primary
Video Off Option : Suspend -> Off IRQ5 (LPT 2) : Primary
Video Off Method : V/H SYNC +Blank IRQ6 (Floppy Disk) : Primary
MODEM Use IRQ : 3 IRQ7 (LPT 1) : Primary
Soft-Off by PWRBTN : Instant-Off IRQ8 (RTC Alarm) : Disabled
** PM Timers ** IRQ9 (IRQ2 Redir) : Secondary
HDD Power Down : Disabled IRQ10 (Reserved) : Secondary
Doze Mode : Disabled IRQ11 (Reserved) : Secondary
Suspend Mode : Disabled IRQ12 (PS/2 Mouse) : Primary
** PM Events ** IRQ13 (Coprocessor) : Primary
VGA : OFF IRQ14 (Hard Disk) : Primary
LPT & COM : LPT/COM IRQ15 (Reserved) : Primary
HDD & FDD : ON
DMA/master : OFF ESC : Quit З И Ж Е : Select Item
PWR-ON by Modem/LAN : Disabled F1 : Help PU/PD/+/- : Modify
RTC Alarm Resume : Disabled F5 : Old Values (Shift) F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
ACPI function
This field enables or disables the ACPI function.
Power Management
This field allows you to select the type of power saving management
modes. There are fours selections for Power Management.
Min. Power Saving Minimum power management
Max. Power Saving Maximum power management.
User Define Each of the ranges are from 1 min. to
1hr. Except for HDD Power Down
which ranges from 1 min. to 15 min.
(Default)
NOTE: In order to enable the CPU overheat protection feature, the
Power Management field should not be set to Disabled.