Insignia NS-PDP50HD-09 - Manual (Page 26)

26
Insignia NS-PDP50HD-09 50" PDP TV
www.insignia-products.com
Audio problems
PC mode problems
Specifications
No color, poor
color, or poor
picture • Check the picture control and adjust
color.
• Make sure you have provided a sufficient
distance between the TV and VCR.
• Try another channel. The problem may
be the broadcast.
• Make sure the video cables are
connected correctly.
• Check the power saving feature and
restore the brightness of your TV.
• Check the program's color features. The
problem may be that it is a black and
white movie.
Poor reception
on some
channels • Check the antenna and its connection. If
there are problems, correct them. If all
connections are tight, the problem may
be with a faulty antenna or cable.
• The station or your cable TV provider
may be experiencing problems.
• Check for sources of interference.
• Re-orient your antenna for better
reception.
Stripes or bars
on picture • Check for interference from other
electronic devices, such as radios and
televisions, and keep magnetic or
electronic devices away from your TV.
• Check your antenna connection,
location, or direction.
Problem Solution
Picture okay, but
no sound • Press the volume control to increase the
volume.
• Press MUTE to make sure that your TV is
not muted.
• Try another channel. The problem may
be with the broadcast.
• Make sure that the audio cables are
installed correctly.
No output from
one of the
speakers • Adjust the balance in the AUDIO menu.
Unusual sound
from inside the
TV • A change in ambient humidity or
temperature may result in an unusual
noise when the product is turned on or
off. This does not indicate a fault with the
product.
Problem Solution
The signal is out
of range • Adjust the resolution, horizontal
frequency, or vertical frequency.
• Check the input source.
Vertical bar or
stripe on the
background,
horizontal noise,
or incorrect
position • Adjust the clock, phase, or
horizontal/vertical position, or try Auto
to configure these options.
The screen color
is unstable or a
single color • Check the signal cable to make sure that
it is connected correctly.
• Reinstall your PC’s video card.
Problem Solution
Plasma panel Panel size 50-inch plasma
Aspect ratio 16:9
Brightness 1300 cd/m2
Contrast ratio 30,000:1
Max. resolution 1920 × 1080
Pixel pitch .480 mm
Maximum colors 16.7 million
Input
connector Video/Audio (L/R) in 2
Video/Audio (L/R) out 1
S-Video/Audio (L/R) in 2
YPbPr/Audio (L/R) 2
VGA/Audio (L/R) 1
HDMI/Audio (L/R) 3
Audio out (L/R) 1
Optical 1
SD card reader 1
USB 1
Headphone 1
Power source 100-240V AC, 50/60 Hz
Power
consumption 580 W
Standby <1 W
Dimensions 47.8 Ч 32 Ч 12.3 inches
(1214 Ч 812.8 Ч 312.4 mm)
Weight 84.9 lbs. (38.5 kg)