Integra DTR-6.8 - Manual (Page 73)

73
Listening to the Radio
—Continued
Changing the PIN Number
1
Remote
controller
Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
2 Use the Up and Down [ ]/[ ]
buttons to select “4. Source
Setup,” and then press [Enter].
The Source Setup menu appears.
Note:
If the Satellite Radio mode is set to
None or XM (see page 68), the “5. SIR-
IUS Parental Lock” item is not avail-
able.
3 Use the Up and Down [ ]/[ ]
buttons to select “5. SIRIUS
Parental Lock,” and then press
[Enter].
The Enter Code screen appears.
“Enter : <0>” appears on the display.
4. Source Setup
1. IntelliVolume
2. A/V Sync
3. Name Edit
4. Satellite Radio
5. SIRIUS Parental Lock
TUNER
4-5. SIRIUS Parental Lock
Enter Code
0 1 2 3 4 5 6 7 8 9
4 Press the [D. TUN] button, and
then use the number buttons to
enter the PIN number.
If you enter the wrong PIN number,
“Wrong Code!” appears on the display.
You’ll be returned to step 3, and will
need to start again.
The SIRIUS Parental Lock menu
appears.
5 Use the Up and Down [ ]/[ ]
buttons to select “Edit Code,”
and then press [Enter].
The New Code screen appears.
“New : <0>” appears on the display.
6 Press the [D. TUN] button, and
then use the number buttons to
enter the new PIN number.
The Confirm screen appears.
“Confirm : <0>” appears on the dis-
play.
4-5. SIRIUS Parental Lock
Edit Code
Parental Lock
4-5. SIRIUS Parental Lock
New Code
Edit Code
4-5. SIRIUS Parental Lock
Confirm
Edit Code
DTR-6.8_En.book Page 73 Wednesday, June 20, 2007 4:16 PM