Basic operations – Integra DTR-6.8 User Manual
Page 57
57
Basic Operations
This section explains how to select the input source (i.e., the AV component that you want to listen to or watch).
Selecting the Input Source
1
3
Multi CH
1
1
3
Multi CH
1
Use the AV receiver’s input selector buttons to select the input
source.
To select the input source with the remote controller, press the
[Receiver] button, and then use the Input Selector buttons.
2
Start playback on the source component.
When you select DVD or another video component, on your TV, you’ll need
to select the video input that’s connected to the AV receiver’s COMPONENT
VIDEO OUT, HDMI OUT or MONITOR OUT.
On some DVD players, you may need to turn on the digital audio output.
3
To adjust the volume, use the Master Volume control, or the remote
controller’s [VOL] button.
The volume can be set to
−
∞
dB,
−
81 dB through +17, +18 dB.
The AV receiver is designed for home theater enjoyment. It has a wide volume
range, allowing precise adjustment.
4
Select a listening mode and enjoy!
See “Using the Listening Modes” on page 77.
Receiver
or
Remote
controller
AV receiver
VOL
or
AV receiver
Remote
controller
DTR-6.8_En.book Page 57 Wednesday, June 20, 2007 11:53 PM