IBM HANDBOOK 260 - Manual (Page 227)

Service Processor 209
Customer RETAIN Login User ID & Customer RETAIN Login Password
Both apply to a service function to which your service provider may or may
not have access. Leave these fields blank if your service provider does not
use RETAIN.
7.5.5.7 Call-Out Test
Allows you to test the call-out functionality, which has been set in the
telephone number setup menu (see 7.5.5.4, “Telephone Number Setup
Menu” on page 206).
7.5.5.8 Ring Indicate Power-On Menu
Please refer to 7.5.2.2, “Ring Indicate Power-On Menu” on page 195.This is a
additional possibility to activate ring indicate power-on.
7.5.6 Set System Name
The System Name, an optional field, is the name your server reports in
problem messages. This name helps your support team, (for example, your
system administrator, network administrator, or service representative) to
more quickly identify the location, configuration, and history of your server.
7.6 General User Menu
The menu options presented to the General user are a subset of the options
available to the Privileged user, as shown in the following screen. You must
know the General Access Password in order to access these menus (if set).
Note: The Service Processor prompt reads either 1> or 2> to indicate which
serial port on the system unit is being used to communicate with the SP.
GENERAL USER MENU
1. Power-On System
2. Read VPD Image from Last System Boot
3. Read Progress Indicators from Last System Boot
4. Read Service Processor Error Logs
5. Read System POST Errors
6. View System Environmental Conditions
99. Exit from Menus
1>