IBM HANDBOOK 260 - Manual (Page 223)

Service Processor 205
You will see your choices selected in the following screen:
7.5.5.2 Serial Port Selection Menu
In any combination, the call-in and call-out functions of each serial port can
be enabled and/or disabled, as shown in the following screen. The call-in for
serial port 1 or 2 must be disabled if you want to activate the ring indicate
power-on functionality. You cannot activate both functions.
Modem Configuration Menu
Port 1 Modem Configuration File Name:
--> Port 2 Modem Configuration File Name: modem_z_sp
To make changes, First select the port and then the configuration
file name
Modem Ports:
1. Serial port 1
2. Serial port 2
Modem Configuration File Name:
3. none
4. modem_f_sp
9. modem_m0_sp
5. modem_f0_sp 10. modem_m1_sp
6. modem_f1_sp
7. modem_z_sp
8. modem_z0_sp
30. Save configuration to NVRAM and Configure modem
98. Return to Previous Menu
1>
Serial Port Selection Menu
1. Serial Port 1 Call-Out:
Currently Disabled
2. Serial Port 2 Call-Out:
Currently Disabled
3. Serial Port 1 Call-In:
Currently Disabled
4. Serial Port 2 Call-In:
Currently Disabled
98. Return to Previous Menu
1>