IBM 704 - Manual (Page 50)

2) Copy the appropriate driver from your RAID adapter
device-driver diskette. Refer to your RAID adapter
documentation to obtain the name of this device driver.
3) Copy the AIC7870.ADD driver from your Adaptec
device-driver diskette.
4) Go to step 8.
b. If your server did not come with a RAID adapter installed,
copy the AIC7870.ADD driver from your Adaptec
device-driver diskette.
8. Specify the appropriate SCSI device drivers when you are
prompted to do so during the operating-system installation
process. Use the SCSI device-driver diskettes that come with
your server.
Note: If you create an installation partition, the recommended size
is less than 500 MB.
OS/2 LAN Server 4.0 Installation
Several Fixpaks are available for OS/2 LAN Server 4.0. These
Fixpaks are updated periodically to provide optimum support of
OS/2 LAN Server 4.0 functions across a wide range of hardware
configurations. To receive these updates in the U.S., call the IBM
OS/2 Technical Support Center at 1-800-992-4777 and request APAR
IC11489. In all other countries, contact the IBM support
organization that services your area, your IBM marketing
representative, or your IBM reseller.
If you have already installed OS/2 LAN Server 4.0, install these
Fixpaks, and skip the remainder of this section. If you have not
already done so, review “Device Drivers” on page 36; then, go to
“Installation Checklist” on page 37.
Before you install OS/2 LAN Server 4.0, verify that you have the
correct network adapter drivers. These files are required for
installing OS/2 LAN Server 4.0.
32 PC Server 704 User's Handbook