Removingadapters, Removing adapters – IBM 704 User Manual

Page 169

Removing Adapters

Attention:

Expansion-slot covers must be installed on all

vacant slots. This maintains the electromagnetic emissions
characteristics of the system and ensures proper cooling of
system components.

To remove an adapter, do the following steps:

1. Remove the adapter:

Note: If you are removing a PCI adapter, the screw is on the

inside back of the server.

a. Disconnect the cables that are attached to the adapter that

you are removing.

b. Note the slot number of the adapter that you are removing.

Chapter 4. Installing Options

151