Report network statistics, Command code – Interphase Tech CONDOR 4221 User Manual
Page 107

Report Network Statistics
95
Report Network Statistics
Table 3-36. Report Network Statistics
The Report Network Statistics Command can be used to obtain network statistics for any Ethernet port available on
the controller. These statistics are accumulated since the last controller reset. The host may also specify a fixed
duration time interval to expire between automatic posting back of network statistics. A separate command must be
issued for each port for which statistics are desired.
This command must be submitted through the MCE to work queue 0.
Command Code
This field must contain the value 0x91 to execute the Report network statistics command.
Report Network Statistics
Offst
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0x00
Command Code
0x01
Command Options
0x02
Return Status
0x03
Normal Completion Level
Normal Completion Vector
0x04
Error Completion Level
Error Completion Vector
0x05
DMA Transfer Control Word
0x06
Buffer Address (MSW)
0x07
Buffer Address (LSW)
0x08
Max Transfer Size / Actual Transfer Size
0x09
Timer Tick Interval
0x0A
to
0x11
Reserved
(18 Bytes)