IBM RELEASE 7.3 - Manual (Page 168)

Subsys Name. The name of the selected storage subsystem.
Warning. The current warning threshold value for the selected subsystem. If the storage class
defaults are to be used, the text “default” will be displayed.
Critical. The current critical threshold value for the selected subsystem. If the storage class
defaults are to be used, the text “default” will be displayed.
Buttons
Set To Defaults. A button to remove the threshold override values from the selected storage subsystem.
Select a storage subsystem row from the Subsystem List. The selected storage subsystem information
will be displayed in the lower panel. Pressing the Set To Defaults button will commit the changes to the
selected subsystem and “default” will be displayed for both the warning and critical thresholds.
Related Information
Section 4.2.3.8: Storage Class Threshold Overrides on page 81
6.1.4.2. Tape Storage Subsystem-Specific Thresholds
This window is used to define Warning and Critical thresholds unique to a particular storage subsystem,
overriding the values defined in the tape storage class. The user may modify either the number of
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 168