MITSUBISHI ELECTRIC DX-TL4516U - Manual (Page 87)

84
Operation examples
Operation example 1
Specifying the recording period and performing continuous repeat recording.
For loading of a picture supplied from the camera, see “Relation of recording operation to the number of cameras and
recording rate settings” on page 126.
Operation
• Continues recording for 24 hours and repeats recording on a one-month (30-day) cycle.
• Makes the backup of the data simultaneously during recording.
Settings
When setting the total capacity of the copy 2 device (registering the device) to larger than that of the main device, all the
recorded data of the main device can be copied to the copy 2 device. In this operation example, the recorded data of more
than one month in the main device can be stored to the copy 2 device. You can prevent the accidental erasure of the re-
corded data caused by the crash of the main device.
step 1. Execute camera check to automatically
detect the cameras with video signal input.
step 2. Use “Auto” to set “30 Day” and “24 hours” for
“Recording cycle” and “Recording time per
day” respectively.
step 3. Register the multiple HDDs for SerialBus
group of Copy 2.
step 4. Set “To Copy 2” to “SerialBus,” “FIFO
Overwrite” to “On,” and “Overwrite” to “Off.”
step 5. Set “Range of Copy” to “Continue.”
step 6. Select “Execute.”
49-51
75
42
Set Recording Pattern A (Normal/Timer)
Camera Check
Setup Menu
Recording Setting A-Normal(Auto)
Add/Remove HDD Device
External HDD (USB HDD)
System Menu
Copy Data to Copy 2 Drive
Set Copy 2 Drive
User Menu
Menu Settings Pages
[Recording settings]
[Copy device settings]
[Backup settings]
Recording 1
1
1
2+D
step 1
step 2
Memory 5
1
2
step 3
2
4
Copy 2
step 4
steps 5, 6