beautypg.com

Recording, Setup menu – MITSUBISHI ELECTRIC DX-TL4516U User Manual

Page 52

background image

49

Operations

Recording

Setup Menu

Settings concerning normal recording and

alarm recording

This unit allows you to set the setting items for normal
recording and alarm recording individually. It means, more
detailed settings are possible, such as changing the recording
rate of the camera of which the alarm signal is input while
leaving the normal recording settings as they are.

The recording and playback cannot be performed properly

when the clock of this unit does not run. Check that the
clock of this unit is running before operation.

The settings cannot be changed during normal recording

and alarm recording. Change the setting after stopping
recording. To pause the alarm input (up to 5 minutes), set
the “Alarm Input” in the menu to “Off.”

When the camera number with no camera connected is

set in the to
, the warning display
appears when recording pictures (

see “Warnings and

CALL OUT output” on page 108).

To activate normal recording and alarm recording, set the
following items:
• Recording rate and picture grade for normal recording

and alarm recording

( and Menu>)

• The camera selection during alarm recording

(“Alarm Mode” in )

• Whether to execute pre-alarm recording

(“Pre-Alarm Duration” in )

• The recording camera and trigger for alarm recording

( and )

Pre-alarm recording

Pre-alarm recording is a function to start recording a few
seconds before the ALARM IN terminal on the rear panel is
grounded, motion is detected, or the alarm signal is input via
LAN or RS-232C communication.

Records data on HDD before alarm is input.

Time

Camera input

Recording process

disturbance

Alarm input

• The PRE-ALARM indicator illuminates during pre-alarm

recording and during stand-by mode.

• Executes only when pre-alarm recording is set in the

. After the input of an alarm sig-
nal, only the cameras set for alarm recording are used for
recording.

When a pre-alarm recording starts during normal

recording, it may be executed for a different time period
from the alarm setting.

Set Recording Pattern A (Normal/Timer) to D

(Timer)

This item is used to make the recording settings for normal
and alarm recordings.

1

2 + D

1 + D

Recording

1

1 to 4

D

D

D

2 + D

2 + D

3

step

1

step

2

steps

2 to 6

4

D

D

D

D

step

7

1 + D

5

6

D

steps

7, 8

Set Recording Pattern A (Normal/Timer)
to D (Timer)

Camera Check

Setup Menu

Recording Setting A to D-Normal(Auto)

Recording Setting A to D-Normal(Easy)

Recording Setting A to D-Normal

Recording Setting A to D-Normal(Manual)

Recording Setting A to D-Normal

Recording Setting A to D-Normal

Recording Setting A to D-Alarm(Easy)

Alarm Recording Menu

Recording Setting A to D-Alarm(Manual)

Recording Setting A to D-Alarm

Recording Setting A to D-Alarm

Alarm Camera Setting

Alarm Camera Setting A to D 9-16

Alarm Camera Setting A to D 1-8

Alarm Trigger In/Out

Alarm Input

Alarm Trigger Setting A to D