MITSUBISHI ELECTRIC DX-TL4516U - Manual (Page 69)

66
System (continued) Setup Menu
Alarm Display Setting
This item is used to switch the display to the picture input
with alarm signal in the single screen display or split screen
display which has been pre-set. When another alarm signal is
input during alarm recording, the picture with the latest alarm
signal appears in the single screen display or split screen dis-
play. The screen returns to its original display when the alarm
recording is completed.
The alarm display setting is available for either output A or B.
Select the desired output for alarm display. You cannot use
alarm display on both output A and B at the same time.
4
5
System 4
Setup Menu
Alarm Display Setting
Multiplexer Setting
step 1. Select output A or output B.
Off: Does not perform alarm display.
step 2. Select the desired single screen display or split
screen display which is set in the Setting> to be displayed when the alarm signal is
input for each sensor connected.
Covert Camera Setting
This item is used to set the picture of the specified camera
number not to be displayed regardless of the presence of
video signals.
6
9
1 2 3
10 11
13 14 15 16
12
4
8 - - - -
When the picture is interrupted due to the camera trouble,
etc. while the is set to “Off,”
the warning message does not appear on the screen.
And the buzzer does not sound even when “Warning” is
set for “Buzzer” setting. The unit registers this error in the
, however, the CALL OUT signal is not
output.
When setting to “Off” for a
camera which is set for recording operation, recording is
performed without displaying the picture on the screen.
When is set to “Off,” the play-
back picture is not displayed and the screen turns blue
for that camera number. To display the playback picture,
switch the setting to “On.”
In alarm display setting function, single screen display
is not displayed for the camera number of which covert
camera setting is “Off.”
5
5
System 4
Setup Menu
Covert Camera Setting
Multiplexer Setting
step 1. Set the covert camera setting for each camera
number.
On: Displays the picture supplied from the camera.
Off: Does not display the picture supplied from the
camera and the screen of that camera turns blue.