MITSUBISHI ELECTRIC DX-TL4516U - Manual (Page 15)

11
Beginning
Setting other various functions
• Setting the camera title/recorder title.
See “ Camera Title” and “ Recorder Title”
on pages 67, 68.
• Setting the display mode.
See “ On Screen Information” on page 67.
• Setting the output signal of the unit status.
See “ Mode Out Settings” on page 58.
Setting the motion detection
• Selecting the camera number.
• Setting the detection areas.
• Setting the sensitivity.
• Setting the minimum number of dots for starting
the motion detection operation.
• Setting the detection interval.
See “Motion Det” on page 56.
Setting the timer recording
• Setting the normal/alarm recording or pre-alarm
recording.
• Setting the recording rate/picture grade for
normal recording.
• Setting the recording rate/picture grade for alarm
recording.
• Setting the motion detection recording.
• Selecting the camera selection during the alarm
recording and trigger for alarm recording.
• Setting the alarm recording time.
• Setting the pre-alarm recording time.
• Setting the PTZ camera preset.
See “ Set Recording Pattern A
(Normal/Timer) to D (Timer)” on page 49.
• Setting the timer program.
• Setting the holiday.
• Selecting the timer program number.
• Making the timer recording settings.
• Selecting the day of the week.
• Selecting the start time.
• Selecting the end time.
• Selecting the program mode.
• Selecting the motion detection mode.
( • Selecting the special day of the week.)
See “Timer” on page 54.
Timer recording is executed and completed
See “ Warnings and their appropriate
countermeasures” on page 108.
Searching the recorded data
• Setting the device to be searched.
See “ Select Source Device” on page 39.
• Setting the alarm list search.
See “ Search by Alarm List” on page 94.
The search is completed and the search result is
displayed
Playback the search result
• Selecting the camera number to be played back.
See “ Multiplexer Setting” on page 64.
• Selecting the split/sequence screen.
See “ Multiplexer Setting” on page 64.
• Playback the recorded data.
See “ Basic playback” on page 92.
• Selecting the playback speed.
See “ Various playback functions” on page
80.
Copy the data
• Setting the copy device.
See “ Add/Remove HDD Device” or “ Add/
Remove DVD/CD Drive” on pages 75, 76.
• Setting the copy function.
See “ Copy Data to Copy 1 Drive” or “
Copy Data to Copy 2 Drive” on pages 41, 42.