MITSUBISHI ELECTRIC DX-TL4516U - Manual (Page 75)

72
PTZ Setting System Menu
This menu is used to make the settings for the cameras to be
controlled.
PTZ Camera Configuration
This item is used to make the detailed settings for the
cameras to be controlled.
PTZ Setting 2
1 PTZ Camera Configuration
System Menu
step 1. Select the camera number to be set.
step 2. Set the detailed settings for the camera number
selected in step 1.
Device: Setting for the type of the camera or
controller connected.
Port: Setting for the output terminal of the control
signal. This item is automatically set depending on
the input of the camera or the controller.
Device ID: Setting for the address of the camera
to be controlled. Make the same settings as the
camera or the controller.
Pan Reverse: Reverses the pan direction
depending on the installation conditions.
Tilt Reverse: Reverses the tilt direction depending
on the installation conditions.
Configuration Check List
This item is used to check the connecting status of the
camera or the controller, and the address and port set in
.
PTZ Setting 2
2
D
Configuration Check List
System Menu
Configuration Check List
step 1. Select in the
Setting> menu.