Milan Technology MIL-SME801P - Manual (Page 97)

91
Preparing for Web Management
You must either reconfigure the IP address information for the switch using
the serial console port following the instructions in the “Console Management”
section, or setup your network to support the default address of the switch.
The default values are as follow:
IP Address: 192.168.1.77
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.6
User Name: root
Password: root
If you change the IP address of the box from the one above, please
replace references of 192.168.1.77 in the remainder of the manual with
the new IP address of the device.