Milan Technology MIL-SME801P - Manual (Page 45)

39
4-3-5-2. Create VLAN Group
Create Port-Based VLAN
Select to create a port-based VLAN and add member or nonmember
ports to it.
1. VLAN Name: Type a name for the new VLAN using 15 alphanumeric
characters and no spaces.
2. Group ID: Type the VLAN group ID. The group ID range is 1to 4094.
3. Member: Press the Space key to choose VLAN member type. There are
two selections:
Member: The port is member port.
NO: The port is NOT member port.
4. Press “ESC” to go back to the action menu line.
5. Select to save all configured values.
NOTE: If the trunk groups exist, it will be displayed (ex: Trunk1, Trunk2…)
after port 9. The user can select if it is the member of the VLAN or not.