Milan Technology MIL-SME801P - Manual (Page 113)

107
1 to 1000: valid rate value.
Priority: This static priority is based on each port setting. If the port priority
is set high, incoming frames from this port will always be high priority frames.
Security: A port in security mode will be “locked” unless address learning is
enabled. Only the incoming packets with SMAC already existing in the
address table can be forwarded normally. User can disable the port from
learning any new MAC addresses, and then use the static MAC addresses
screen to define a list of MAC addresses that can use the secure port.
Enter the settings, then click Apply button to save the changes on this page.