Milan Technology MIL-SME801P - Manual (Page 40)

34
4-3-5. VLAN Configuration
This page can set VLAN mode to port-based VLAN, 802.1Q VLAN or disable
VLAN function.
All ports are automatically placed in VLAN 1, the default VLAN. To create
new VLANs, use the Create a VLAN Group menu and add a VLAN. Make
sure when you enter a VLAN name you do not leave spaces. For example
VLAN2 is correct; VLAN 2 will give an error. The VLAN name can be any 15
alphanumeric characters. Special characters are not allowed.
NOTE: When changes are made to the VLAN mode, it is recommended that
the device be rebooted to ensure system integrity.