Milan Technology MIL-SME801P - Manual (Page 33)

27
4-3-1-2. IP Configuration
This menu enables the user to change the default settings of the IP address,
subnet mask and gateway. Rebooting the switch is necessary to have the
configuration change take affect.
DHCP: User can disable or enable the DHCP function.
IP Address: User can assign a new IP address for the switch.
Subnet Mask: User can assign a new subnet mask IP address for the switch.
Gateway: User can assign a new gateway IP address for the switch.
Actions->
: Configures all items. When finished, pressing ESC returns to the
action menu line.
: Saves all configured values.
: Exits the IP configuration page and returns to previous menu.
Note: Rebooting the switch is necessary to have the configuration change
take effect.