Milan Technology MIL-SME801P - Manual (Page 146)

140
5-4-13. TFTP Update Firmware
The following menu options provide some system control functions to allow a
user to update firmware and remotely reboot the switch system. Before
updating, make sure you have your TFTP server ready and the firmware
image copied to the TFTP server.
TFTP Server IP Address: Enter the TFTP server IP address.
Firmware File Name: Enter the firmware image file name.
5-4-14. Configuration Backup
5-4-14-1. TFTP Restore Configuration
The configuration image can be downloaded into the switch from a TFTP
server. When restoring the image, care must be taken to download an
image made from the same revision level of software as is in use on the
switch.
TFTP Server IP Address: Enter the TFTP server IP address.
Restore File Name: Enter the correct file name to be restored.