MITSUBISHI ELECTRIC FR-A500L - Manual (Page 8)

1.1 Pre-Operation Information
OUTLINE
1
1.1.1 Precautions for operation
Incorrect handling might cause the inverter to operate improperly, its life to be reduced considerably, or at the
worst, the inverter to be damaged. Handle the inverter properly in accordance with the information in each
section as well as the precautions and instructions of this manual to use it correctly.
This manual is written for the FR-A500L series large capacity inverters.
For handling information on the parameter unit (FR-PU04), inboard options, stand-alone options, etc., refer to
the corresponding manuals.
(1) Unpacking and product check
Unpack the inverter and check the capacity plate on the front cover and the rating plate on the inverter side
face to ensure that the product agrees with your order and the inverter is intact
1) Inverter type
MITSUBISHI ELECTRIC CORPORATION
MITSUBISHI
MADE IN JAPAN
MODEL
INVERTER
FR-A540L-530K
INPUT
OUTPUT
XXXXX
WEIGHT 75kg
XXXXX
Rating plate
output rating
Rating plate
Serial plate Input rating
Inverter type
Serial number
SERIAL:XXXXXXXXXXX
2) Accessory
Instruction manual
If you have found any discrepancy, damage, etc., please contact your sales representative.
(2) Preparations of instruments and parts required for operation
Instruments and parts to be prepared depend on how the inverter is operated. Prepare equipment and parts
as necessary.
(3) Installation
To operate the inverter with high performance for a long time, install the inverter in a proper place, in a correct
direction, and with proper clearances.
(4) Wiring
Connect the power supply, motor and operation signals (control signals) to the terminal block. Note that
incorrect connection may damage the inverter and peripheral devices. (See page 8.)
Symbol Specifications
NA U.S. specifications
Symbol Applicable Motor Capacity
530K Indicates capacity in “kW”
Symbol Voltage Class
A540L 400V class
FR - A540L - 530K -