MITSUBISHI ELECTRIC 700 Series User Manual
Page 131
126
3.25.6 Output Instructions : Device set, reset ... SET, RST
Functions
(1) Turns on the specified device when the SET input turns on.
(2) The device turned on is held on if the SET input turns off. It can be turned off by
the RST instruction.
(3) When the SET input is off, the device status does not change.
(1) When the RST input turns on, the specified device operates as described below.
(2) When the RST input is off, the device status does not change.
Usable Devices
Digit
Designation
Error
Flag
Bit devices
Word (16-bit)
devices
Constants Level
X
Y
M
T
C
D
K
H
N
(M9010,
M9011)
SET
{
{
RS
T
{
{
{
{
{
SET
RST
Device
Status
Y, M
The coil and contact are turned off.
T, C
The present value is reset to 0 and the coil and contact are turned off.
D
Cleared to 0.
D
SET input
RST input
SET
Device number
to be set (turned
on)
RST
Device number
to be reset
D
SET input
RST input