Muratec QUADACCESS MFX-2550 - Manual (Page 163)

7-24 Driver Print Settings
Feature Set: JCL 1
You can specify the settings such as the paper type and margin on the front.
Item Description
Custom Paper Select this to print custom paper with the same size as a standard size. If
you do not select this, standard size custom paper is printed as standard
paper.
Paper Type Select the paper type to print on.
You can select the following paper types:
Plain / PasteBoard / OHP / Postcard
Toner Saving Select this to restrict toner consumption.
Resolution Select the printing resolution.
You can select the following resolutions.
300 × 300 dpi / 600 × 600 dpi
Print Density Set the print density level (between -50 and 50).
Binding Width
(Front) Set the margin on the front (0 to 1.18 in.).
Mac OS X 10.4 or earlier is not supported. *1