Watermark settings dialog box – Muratec QUADACCESS MFX-2550 User Manual
Page 132
1
2
3
4
5
6
Printing F
rom
W
indows
Driver Print Settings 6-49
Watermark Settings Dialog Box
You can click register, edit, or delete watermarks.
Item
Description
Watermark
Displays a list of the registered watermarks.
Add
Click this to register a new watermark.
Edit
Click this to edit the selected watermark.
Delete
Click this to delete the selected watermark.
Name
Enter the name to register for the watermark. (Maximum of 30 characters.)
Watermark String
Enter a text string to be printed as the watermark. (Maximum of 30 characters.)
Fonts
Select the font to use from the pull-down menu.
Size
Set the size of the string (10 to 144 point).
Italic
Select this to set the italic style for the string.
Bold
Select this to set the bold style for the string.
Angle
Select the angle for the string from the pull-down menu.
You can select the following angles for the string:
Horizontal / Vertical / Diagonal / User Set
If you select “User Set”, you can set a custom angle. (Between -180 and 180 degrees)
Position
Select “Center” or “User Set”.
If you select “User Set”, you can set a horizontal position (between -10.0 and
10.0) and a vertical position (between -10.0 and 10.0) based on the center of
the paper.
Shading
Select the density for the string from the pull-down menu.
You can select the following densities for the string:
10 % / 25 % / 50 % / 75 % / 100 %
For details on the procedure for setting watermarks, refer to “