Motorola FLIPOUT 68004121004 - Manual (Page 50)

48 Security
Screen timeout. If you don't touch the screen or
press any keys for this amount of time, the screen
locks automatically. To unlock, see “Lock & unlock” on
page 48.
Lock & unlock
To lock the screen/phone:
• Press Power .
• Let the screen time out (don’t press anything).
• Switch the power off.
To unlock the screen/phone:
• Press Power —if you've set a lock pattern or
passcode, you'll be asked to enter it.
Forgotten your pattern or passcode?
In the password unlock screen, on the home screen
touch Menu > Forgot passcode? to unlock your
phone with your MOTOBLUR email address and
MOTOBLUR password, or follow the onscreen
instructions.
In the pattern unlock screen, after you enter an
incorrect pattern five times, you can touch Forgot
passcode? to unlock your phone with your
MOTOBLUR email address and MOTOBLUR
password.
Lock your SIM
Enable SIM PIN
To lock your SIM (the next time you power up the
phone you will need to enter your SIM PIN), on the
home screen touch Menu
>
Settings > Location
& security > Set up SIM card lock. Enter your SIM
PIN code.
Caution: If you enter an incorrect PIN code three
times, your phone locks your SIM card and asks for
your PIN unlock code. Contact your service provider.
Change SIM PIN
To change your SIM PIN , on the home screen
touch Menu > Settings > Location & security >
Set up SIM card lock > Change SIM PIN.
PUK code
To unlock your SIM PIN, you need to enter your PIN
unlock code (PUK code) when prompted.
Note: Your PUK code is provided by your service
provider.
Reset
To reset your phone to factory settings and erase all
the data on your phone, on the home screen