Gateway Profile 6 - Manual (Page 43)

www.gateway.com
37
Replacing the processor fan
You need to remove the processor fan to replace it or to access
system components that are behind the fan.
To replace the processor fan:
1 Remove the back panel by following the instructions in
“Opening the case” on page 35 .
2 Slide the processor fan’s release lever to the left.
3 Swing the top part of the fan away from the computer.
4 Rotate the fan down until it stops.
5 Unplug the fan’s power cable from the system board.
8512032.book Page 37 Tuesday, January 9, 2007 1:47 PM