Grizzly G0564 - Manual (Page 22)

-20-
Model g0563/g0564 (Mfg. since 10/11)
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from machinery.
SEctIOn 4: OpEratIOnS
Sanding belts
there are many types of sanding belts to choose
from. we recommend aluminum oxide for general
workshop environments. Below is a chart that
groups abrasives into different classes and shows
which grits fall into each class.
Grit type
24-36 Very Coarse
40-60 Coarse
80-100 Medium
120-180 Fine
220-360 Very Fine
the general rule is to sand a workpiece with
progressively higher grits. refer to Section 5:
Accessories
on page 24 for replacement sanding
belts.
never use the Model G0563/G0564 for appli-
cations other than those for which it was
made. DO nOt overload the machine or
use excess force when sanding. Severe
personal injury, damage to the machine, or
damage to your workpiece could occur.
Emergency Stop
button
the Model g0563/g0564 is equipped with an
emergency stop button on top of the sander.
should an emergency ever occur during use of
the sander, immediately press the emergency
stop button. see
figure 14 for the emergency
stop button location.
figure 14. Emergency stop button.