Grizzly G0564 - Manual (Page 13)

Model g0563/g0564 (Mfg. since 10/11)
-11-
Wear safety glasses dur-
ing the entire set up pro-
cess!
SEctIOn 3: SEt up
about this Section
the purpose of this section is to guide you through
the required steps to get your machine out of its
packaging and into operating condition.
Items needed for
Set up
the following items are needed to complete the
set up process, but are not included with your
machine.
Description Qty
phillips screwdriver ........................................... 1
straight slot screwdriver ................................... 1
Machinist's square ............................................ 1
hammer ............................................................. 1
socket
7 /
8
" .......................................................... 1
ratchet w/6" extension ...................................... 1
hex wrench 4mm .............................................. 1
dust Collector .................................................... 1
dust hoses 4".................................................... 2
hose Clamps 4" ................................................. 2
If you do not read this
entire manual before
operating machine, you
will greatly increase your
chances of injury. to pro-
tect yourself, read and
understand this entire
manual!