Grizzly G1870 User Manual

Instructions

Specifications

Bore Diameter .................................................. 1"
Length............................................................... 6"
Diameter:

G1970 ........................................................ 3"

G1971 ........................................................ 4"

G1972 ........................................................ 6"

Air Inlet Type ...............................Schrader Valve
Maximum Pressure .................................. 10 PSI
Inflation Method .................... Manual Pump Only

Inventory

A. Pneumatic Sanding Drum .......................... 1

B. Sanding Sleeve .......................................... 1

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#JB10527 PRINTED IN TAIWAN

MODEL G1970/G1971/G1972

PNEUMATIC SANDING

DRUM FOR BUFFERS

INSTRUCTIONS

Figure 1.

Model G1972.

Functional Overview

A pneumatic sanding drum mounted to a buffer
allows for easy and smooth sanding of contours
and curves.

The inflatable bladder provides for easy changes
of the replaceable sanding sleeve and also allows
for fine-tuning of the overall flexibility of the drum
for sanding compound curves and contoured sur-
faces.

By increasing the pressure in the drum, a user
can create a more rigid surface for sanding shal-
low contours. Similarly, by decreasing the pres-
sure, a user can soften the surface of the drum,
allowing it to "wrap-around" workpieces with
tighter curves.

Completely releasing the pressure decreases the
diameter of the drum so the sanding sleeve can
be removed and replaced.

EYE INJURY HAZARD!

Always wear safety glasses

during use to prevent

serious personal injury.
10 PSI MAX AIR PRESSURE!

Exceeding this PSI may

result in injury/tool damage.

Use manual pump only!

RESPIRATORY HAZARD!

Sanding produces fine

dust. Wear the appropriate

protection during use!