Opening the bios setup utility, Opening the bios setup – Gateway 955 User Manual
Page 96
90
Chapter 5: Using the BIOS Setup Utility
www.gateway.com
Opening the BIOS Setup utility
The BIOS Setup utility stores basic settings for your server. These settings include
basic hardware configuration, resource settings, and password security. These
settings are stored and saved even when the power is off.
To open the BIOS Setup utility:
1
Restart your server, then press F2 when the Gateway logo screen appears
during startup.
When you select menu items, the Item Specific Help box on the right side
of the screen displays specific information about the selection. The
command bar across the bottom of the screen shows the keys you press
to access help, navigate through the menus, and perform other tasks.
2
Select one of these menus:
■
Main
gives you access to basic information and settings related to your
server’s hardware and configuration.
■
Advanced
gives you access to information and settings for PCI,
peripheral devices, memory, and the chipset.
■
Security
gives you access to settings related to system access passwords.
For more information, see
■
Server
gives you access to settings for system management, console
redirection, event log configuration, and fault-resilient boot settings.
■
Boot
gives you access to information and settings for startup features
and startup sequences.
■
Exit
gives you access to options for closing the BIOS Setup utility.
Caution
The options in the BIOS Setup utility have been set at the
factory for optimal performance. Changes to these
settings will affect the performance of your server.
Before changing any settings, write them down in case you
need to restore them later. You can record the settings on
a printout of this guide’s appendix for