Gateway 955 User Manual
Page 107
101
Error messages
www.gateway.com
Invalid partition table
■
The master boot record may be corrupt. For troubleshooting information,
see
“The master boot record is corrupted” on page 107
Invalid password
■
Enter your password again. Some passwords are case sensitive.
■
If you do not know the password, you may need to reinstall the software
you are trying to access.
■
System startup passwords are stored in BIOS. If this password has been set
and you do not know it, you may be able to reset the password through
system board jumper settings. For instructions, see
.
Memory errors were detected while the system started up
■
See
“Memory errors were detected during server start up” on page 108
for
a possible solution.
Memory size error
■
Restart your server, then open the BIOS Setup utility by pressing and
holding F2 while your server restarts. Save the memory configuration.
Missing operating system
■
The master boot record may be corrupt. For troubleshooting information,
see
“The master boot record is corrupted” on page 107
System Event Log Full
■
Clear the event log. To clear or view the event log, restart your server, then
open the BIOS Setup utility by pressing and holding F2 while your server
restarts. Select the
Server
menu, then select the
Event Log Configuration
menu.