Gateway 955 - Manual (Page 83)

77
Replacing the CMOS battery
www.gateway.com
Replacing the CMOS battery
If the server clock does not keep time or the settings in the BIOS Setup utility
are not saved when you turn off the server, replace the CMOS battery with an
equivalent battery.
To replace the battery:
1
Print the appendix for BIOS Settings in this guide.
2
Open the BIOS Setup utility. For instructions, see “Opening the BIOS Setup
utility” on page 90 .
3
Record the BIOS settings on your printout, then close the utility.
4
Turn off your server, then follow the instructions in “Preventing static
electricity discharge” on page 45 .
5
Follow the instructions in “Opening the server case” on page 46 .
Warning Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of or recycle
used batteries by taking them to a hazardous waste facility.
Follow all local regulations for proper battery disposal.