Gateway 955 - Manual (Page 85)

79
Replacing the power distribution board
www.gateway.com
Replacing the power distribution
board
1
Follow the instructions in “Preventing static electricity discharge” on
page 45 .
2
Follow the instructions in “Opening the server case” on page 46 .
3
Remove each of the drives from server, including any drive in the Flex Bay.
For instructions, see
“Installing a hard drive” on page 54 and “Replacing
the CD/diskette drive in the Flex Bay” on page 49 .
4
Remove the power supply. For instructions, see “Replacing the power
supply” on page 71 .
5
Remove the air baffle and the fan module. For instructions, see “Replacing
the fan module” on page 64 .
6
Remove the SCSI backplane. For instructions, see “Replacing the SCSI
backplane” on page 74 .
7
Unplug the two power distribution cables that connect to the system
board.