Gateway ADAC ULTRA2 S466 - Manual (Page 91)

Chapter 7 Troubleshooting 77
Other BIOS Error Messages
Message Problem Suggested Solution
Following SCSI
disk not found
and no empty
slot available for
mapping it The physical disk roaming
feature did not find the physical
disk with the displayed SCSI
ID. No slot is available to map
the physical drive. ADAC
cannot resolve the physical
drives into the current
configuration. Reconfigure the array.
Following SCSI
IDs have the
same data y, z
Channel x: a, b,
c The physical drive roaming
feature found the same data on
two or more physical drive on
channel x with SCSI IDs a, b,
and c. ADAC cannot determine
the drive that has the duplicate
information. Remove the drive or drives
that should not be used.
Unresolved
configuration
mismatch
between disks
and NVRAM on
the adapter The configuration stored in the
ADAC NVRAM does not match
the configuration stored on the
drives. Press a key to run ADAC
Configuration Manager.
Choose View/Add
Configuration from the
Configure menu.
Use View/Add Configuration
to examine both the
configuration in NVRAM and
the configuration stored on the
disk drives. Resolve the
problem by selecting one of
the configurations.