Gateway ADAC ULTRA2 S466 User Manual
Page 51
Chapter 4 Features
37
SCSI Connectors
ADAC Ultra2 S466 has two types of SCSI connectors:
•
a 68-pin high density internal connector and
•
a 68-pin external ultra-high-density connector.
Both connector types can be used for the SCSI channel.
SCSI Termination
ADAC Ultra2 S466 uses active termination on the SCSI
bus conforming to Alternative 2 of the SCSI-2
specifications. Termination enable/disable is automatic
through cable detection.
SCSI Firmware
The ADAC Ultra2 S466 firmware handles all RAID and
SCSI command processing and also supports:
Feature
Description
Disconnect/
Reconnect
Optimizes SCSI Bus seek.
Tagged Command
Queuing
Multiple tags to improve random access
Scatter/Gather
Multiple address/count pairs
Multi-threading
Up to 255 simultaneous commands with elevator sorting and
concatenation of requests per SCSI channel
Stripe Size
Variable for all logical drives: 2 KB, 4 KB, 8 KB, 16 KB, 32
KB, 64 KB, or 128 KB.
Rebuild
Multiple rebuilds and consistency checks with user-
definable priority.