GE Industrial Solutions Entellisys System Administrator Manual - Manual (Page 52)

Preparing and configuring a replacement CPU 52
12
• Several progress messages will display prior to the Step 5 dialog box as shown below. In this
step, the HMI will read the firmware versions of each CPU and verify that they match.
NOTE: If for some reason there is a mismatch in the version number, exit out of the procedure
by clicking Cancel and restart the procedure from the beginning of this section.
Figure 12-12 Step 5 – CPU Firmware dialog box
• Click Next to proceed to Step 6. Click Next to update the option string. This task may be
skipped by selecting the check box if the new CPU is known to already have the correct
option string.
Figure 12-13 Step 6 – Update Option String dialog box