GE Industrial Solutions Entellisys System Administrator Manual - Manual (Page 48)

Preparing and configuring a replacement CPU 48
12
12.2 Part II – Replacing the CPU
On the Replace CPU tab in the Maintenance dialog box, click Perform Replacement to begin
the CPU replacement wizard. This wizard assists in replacing the CPU and modifying the IP
Address Configuration, Firmware, Option String, Settings, and CPU Commission options.
• The Step 1 – Select CPU dialog box displays again to confirm which CPU is to be replaced:
Figure 12-6 Step 1 – Select CPU dialog box
• After clicking Next, The following dialog box reminder will display:
Figure 12-7 Step 2 – Option String dialog box