Gateway 7400 - Manual (Page 33)

Opening the case 25
Removing the bezel
The locking bezel provides secure access to the system components. You must
unlock and remove the bezel before you can remove the side cover panel and
access the interior of the system.
To remove the bezel:
1 Turn off the system and disconnect the power cord, modem cord (if
installed), and all external peripheral devices.
2 Observe all safety and static electricity precautions. (See “Preventing static
electricity discharge” on page 22.)
3 Unlock the bezel, if it is not already unlocked.
4 Press the tabs at the sides of the bezel and pull the top of the bezel away
from the server.
5 Lift the bezel away from the chassis.
8508366.book Page 25 Tuesday, October 23, 2001 11:29 AM