Furuno CH-300 - Manual (Page 87)

5-1
5. MENU OPERATION
This chapter provides menu operating information on menus not previously discussed:
COM1, COM2, PRESET (or SHORT-CUT, depending on the setting of CUSTOM KEY on
the SYSTEM SETTING 1 menu) and SYS (System) menu.
5.1 COM1 Menu
1. Press the MENU key to open the menu.
2. Press ▲ to choose MENU, and then press ◄ to choose COM1.
TX POWER MAX
PULSELENGTH LONG
TX RATE 10
INT REJECT OFF
AGC OFF
: SELECT : CHANGE MENU: END
MENU COM1 HORZ VERT ES PRESET SYS COM2
AUDIO LEVEL 0
COM1 menu
3. Press ▲ or ▼ to choose item; ◄ or ► to open associated dialog box.
4. Press ◄ or ► to choose option desired.
5. Press ▲ or ▼ to return to the COM1 menu, or press the MENU key to register your
selection and close the menu.