Dual-frequency display – Furuno CH-300 User Manual
Page 24
1. OPERATIONAL OVERVIEW
1-14
Dual-frequency display
1. Push the GAIN control.
HIGH FREQ GAIN :
5.0
(0-10)
LOW FREQ GAIN : 5.0
(0-10)
PUSH GAIN KNOB TO SPECIFY THE FREQ
ROTATE GAIN KNOB TO CHANGE THE FREQ
2. Push the GAIN control to choose the frequency for which you want to adjust the gain.
3. Rotate the GAIN control to adjust the gain (range: 0-10).
Gain setting high and low frequencies
GAIN(HI) 5.0
GAIN(LO) 5.3
Location of gain setting indications on dual-frequency display
4. Press the MENU key to close the gain setting window.
See also other documents in the category Furuno GPS receiver:
- MARINE RADAR 1953C (100 pages)
- GP-1650D (2 pages)
- GP-1650WD (96 pages)
- GP-1650W (96 pages)
- NAVNET 1943C-BB (92 pages)
- GD-3300 (137 pages)
- DUAL GPS GP-150-DUAL (130 pages)
- GP-1650WF (113 pages)
- NX-300 (65 pages)
- NX-300 (2 pages)
- GP-1850WDF (115 pages)
- GP-3500 (192 pages)
- GP-1850WD (44 pages)
- GP-1850W (98 pages)
- GP-1850WD (98 pages)
- GP-1850W (4 pages)
- GP-1850W (98 pages)
- INTERFACE UNIT IF-2500 (12 pages)
- GP-31 (2 pages)
- GP-33 (98 pages)
- GP-7000 (28 pages)
- GP-7000 (2 pages)
- GP37 (2 pages)
- GP-90 (36 pages)
- CI-35 (69 pages)
- GP-1850DF (63 pages)
- GP-1850F (110 pages)
- GP-30 (2 pages)
- FCV-30 (110 pages)
- BACK GP-80 (103 pages)
- LC-90 MARK-II (2 pages)
- GP-1650W (44 pages)
- DD-80 (119 pages)
- RP-250 (73 pages)
- GP-1650 (94 pages)
- GP-185F (4 pages)
- GP-1600F (97 pages)
- GP-1850D (94 pages)
- GP-7000F (132 pages)
- GP-7000F (52 pages)
- GP-36 (81 pages)
- GP-150-DUAL (123 pages)
- GP-80 (37 pages)
- 1650WDF (4 pages)