FUJITSU C150-E049-02EN - Manual (Page 188)

M3099GX/GH OEM Manual 6-3
DOCUMENT
SPECIFICATION
• Paper thickness is not constant. (like envelope)
• Paper has large rumples or curl. (See Note in next page)
• Paper has folds or tears.
• Tracing paper
• Coating paper
• Carbon paper
• Carbonless paper
• Paper size; smaller than 76 mm x 63 mm size, or larger than A3
width.
• Other than paper; clothes, metal foil, or OHP film.
• Photographic paper
• Paper has notches on its side.
• Shape is other than square.
NOTICE
Do not feed important original document so as not damage it in
rare case.
When scanning a translucent document, set the density to light
mode.
To prevent roller smudging, avoid scanning a document filled out in
pencil. Clean the roller as often as possible when scanning many
document. Once every 1000 pages is recommended.
The chemical composition of some carbonless papers reacts with the
roller rubber and damages the rubber. Check the carbonless papers
before use.
The carbonless papers may be used if:
1. Ream weight is 44 kg (12 lb) or more
2. Hopper load is 500 sheets or fewer
#06 Chapter 6 98.2.22, 1:51 PM 3