FUJITSU C150-E049-02EN - Manual (Page 167)

4-10 M3099GX/GH OEM Manual
3 Adjust the stacker table to
the document size.
Note:
Extend the stacker table and
extension for long
documents. Stand and
extend the stopper up and
also turn the lever in the
stacker down for short
documents.
If the scanner is 500 sheets
hopper type, extend the
stacker table for long
documents. And also use
stopper for small
documents.
Load a document about
20 mm a part from the
stopper.
Document
Stacker
table
Stacker
Stopper
Document
about 20 mm
Stopper
Lamp
Replacement The scanner has two lamps, one for front-side reading and other for
back-side reading. Replace the lamps as follows:
WARNING
Never replace lamp without turning off the power.
WARNING
Wait at least 3 minutes after turning off the power before touching
the lamp.
Lever