FUJITSU C150-E049-02EN - Manual (Page 121)

3-88 M3099GX/GH OEM Manual
Page Code: 3Dh, 3Eh
The page code specifies which mode page(s) to return. Mode page
code usage is defined in Table 3.68.
Table 3.68 Supported Mode Page Code
Page Code
00h
01h - 3Eh
3Dh
3Eh
3Fh
Description
Ignored (Vendor specific)
Reserved
Lamp Timer
Job Separation Sheet
Return all mode pages
An initiator may request the supported mode page from a target. If
an initiator issues a MODE SENSE command with a page code
value not implemented by the target, the target shall return CHECK
CONDITION status and shall set the sense key to ILLEGAL
REQUEST and the additional sense code to INVALID FIELD IN
CDB.
Mode Parameter
The mode parameter list shown in Table 3.69 contains a header,
followed by zero or more block descriptors, followed by zero or more
variable-length pages.
Table 3.69 Mode Parameter List
Bit
Byte
0 - n
0 - n
0 - n
7 6 5 3 2 1 0
Mode Parameter Header
Block Descriptor(s)
Page(s)
4
Block Descriptor is optional and it is not defined for Scanner Device.
This scanner omitts this field.
The six-byte command descriptor block parameter header is defined
in Table 3.70.
#03.pm5 98.2.22, 1:33 PM 88