FARGO electronic S000256 - Manual (Page 26)

RESTRICTED USE ONLY FARGO Electronics, Inc.
Reviewing the Top Line LCD Messages (continued)
Message Cause Solution
Rasterize
Shield Indicates the Printer is loading the
SmartShield security image from the
SmartGuard Access Card into its
memory. Appears when a valid
access card containing a SmartShield
image is first inserted into the Printer.
(Note: If SmartShield image is
named, the name will also appear
along with this message on the
bottom line of the LCD Display.
Appears only when using the
SmartGuard Security Feature.)
See the SmartGuard User’s
Guide for more information.
Reading Key
Data Indicates the Printer is reading the
data from the SmartGuard Access
Card. Appears when a valid access
card is first inserted into the Printer.
Appears only when using the
SmartGuard Security Feature.
See the SmartGuard User’s
Guide for more information.
Rib Calib Failed
Error Indicates that an attempt at calibrating
the ribbon Sensor through the Printer
Driver has failed. See the Resolving the
Skipping Ribbon Panel
problem procedure on page
40.
Ribbon
Error/Out Error Indicates either the print ribbon is out
or a ribbon error has occurred. See the Resolving the Ribbon
Low error message procedure
on page 42.
Ribbon
Jam/Out Error The print ribbon has become jammed
in the Printer Rollers, it is stuck to the
surface of the card, or it is out. See the Resolving the Ribbon
Breaking problem procedure
on page 43.
Continued on the next page
Persona
® C25 Card Printer User Guide (Rev. 4.0)
26