FARGO electronic S000256 - Manual (Page 11)

RESTRICTED USE ONLY FARGO Electronics, Inc.
Technical Specifications (continued)
Term Description
Accepted Card
Thickness .010 in. (.254 mil) to .030 in. (.75 mil)
Accepted Card
Types PVC or Polyester cards with polished PVC finish. Monochrome
resin ribbon required for straight polyester cards.
Input Hopper Card
Capacity Accepts up to 100 standard CR-80 PVC cards (30 mil).
Print Speed
• Approx. 8 seconds per card / 450 cards per hour (K)*
• Approx. 15 seconds per card / 240 cards per hour (B,O)*
• Approx. 25 seconds per card (YMCO)
• Approx. 30 seconds per card / 120 cards per hour (Y,M,C,K,O)*
* Indicates the ribbon type and the number of ribbon panels printed
where Y=Yellow, M=Magenta, C=Cyan and K=Resin Black,
O=Overlay, B=Dye Sublimination Black
System
Requirements Windows 3.1x and Windows 95 driver included for IBM-PC's and
compatibles. 32-Bit Print Spooler available for Windows 95
Interface Standard 8-bit Centronics-type parallel (ECP compatible)
Operating
Temperature 65 º F to 80 º F (18 º C to 27 º C).
Humidity Non-Condensing 20% to 60%.
Dimensions 9.05" H x 17.43" W x 10.94" D (229mmH x 442mmW x 278mmD)
Weight 26 lbs. (11.8 kg).
Supply Voltage 100 to 240 VAC (2 A)
Supply Frequency 50 Hz / 60 Hz.
Persona
® C25 Card Printer User Guide (Rev. 4.0)
11